DTC U0433-00: Invalid Data Received From Image Processing Module A [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
U043300	Invalid Data Received From Image Processing Module A	Error signal received from laser sensor* *: With pre-collision	Warning/indicator light: Not applicable	DTC stored	Applicable	Drive cycle: Not applicable Self test type: CMDTC self test, ODDTC self test

Description	Error signal received from laser sensor
Detection condition	Combination meter detects the following conditions: Malfunction of laser sensor or pre-collision related system (laser sensor, brake actuator, ECM) Laser sensor control is temporarily inhibited.
Fail-safe	Detection condition: Malfunction in laser sensor or pre-collision related system (laser sensor, brake actuator, ECM) Inhibits the pre-collision control. Warning message related to the pre-collision is displayed in the multi-display. (with Multi-display) Detection condition: Laser sensor control is temporarily inhibited. Temporarily inhibits the pre-collision control.
Possible cause	System related to the pre-collision stores DTCs. The laser sensor cannot temporarily function due to dirt on the windshield glass. Laser sensor malfunction Combination meter malfunction
System wiring diagram	Not applicable