DTC U0402-68: Invalid Data Received From TCM event information [07/2015 - ]: Procedure

1. Retrieve the TCM DTCs using the Techstream.

   Refer to ON-BOARD DIAGNOSTIC SYSTEM DTC INSPECTION [07/2015 - ]

2. Are any DTCs displayed?

   Result

   Proceed to
   Yes
   No

Result:  2

Yes 

REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING. Refer to  DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ] 

Result:  1

No 

See step  2

1. Drive the vehicle at a vehicle speed of 30 km/h {19 mph} or more for 100 s or more.
2. Retrieve the TCM DTCs using the Techstream.

   Refer to ON-BOARD DIAGNOSTIC SYSTEM DTC INSPECTION [07/2015 - ]

3. Are any DTCs displayed?

   Result

   Proceed to
   Yes
   No

Result:  2

Yes 

REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING. Refer to  DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ] 

Result:  1

No 

See step  3

1. Clear the DTC for the combination meter using the Techstream.

   Refer to DTC CHECK / CLEAR [07/2015 - ]

   Body Electrical > Instrument Cluster > Clear DTCs 

2. Switch the ignition ON (engine off or on) and wait for 20 s or more.
3. Retrieve the combination meter DTCs using the Techstream.

   Refer to DTC CHECK / CLEAR [07/2015 - ]

   Body Electrical > Instrument Cluster > Trouble Codes 

4. Is the same DTC displayed?

   Result

   Proceed to
   Yes
   No

Result:  2

Yes 

See step  5

Result:  1

No 

See step  4

1. Are any other DTCs displayed?

   Result

   Proceed to
   Yes
   No

Result:  1

No 

DTC TROUBLESHOOTING COMPLETED. 

Result:  2

Yes 

REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING. Refer to  DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ] 

1. If the malfunction recurs, replace the combination meter.

   Refer to REMOVAL [07/2015 - ]

2. Go to the next step.

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  4