DTC U0402-68: Invalid Data Received From TCM event information [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
U040268	Invalid Data Received From TCM event information	Error signal received from transmission/transaxle* *: ATX	Warning/indicator light: Not applicable	DTC stored	Not applicable	Drive cycle: Not applicable Self test type: CMDTC self test, ODDTC self test

Description	Error signal received from transmission/transaxle
Detection condition	Combination meter received the error signals from the transmission/transaxle for 1 s or more with the ignition switched ON (engine off or on).
Fail-safe	Not applicable
Possible cause	The transaxle could not send a normal signal temporarily. (DTCs are stored in the TCM.) TCM malfunction Combination meter malfunction
System wiring diagram	Not applicable