DTC B1C79-13: Front Washer Pump circuit open [07/2015 - ]: Contents

DTC No.	Detection Item	DTC Detection Condition	Warning Indicate	Memory	Fail-safe Operation	Note
B1C7913	Front Washer Pump circuit open	Washer motor circuit malfunction	Not applicable	DTC Stored	Not applicable	Drive cycle: Not applicable Self test type: CMDTC self test

DESCRIPTION	Washer motor circuit malfunction
DETECTION CONDITION	Power source control (power management control ECU) detects an open circuit in the washer motor circuit with the ignition switched ON (engine off or on).
FAIL-SAFE	Not applicable
POSSIBLE CAUSE	Washer motor connector or terminal malfunction Washer motor malfunction Power source control (power management control ECU) connector or terminal malfunction Open circuit in wiring harness between the following terminals: Washer motor terminal A30-2 -Power source control (power management control ECU) terminal A27-6 Washer motor terminal A30-1 - power source control (power management control ECU) terminal A27-9 power source control (power management control ECU) malfunction