Reassembly [05/2014 - ]

INSTALL COMBINATION METER COVER
1. Engage the 6 claws to install the combination meter cover.
  
  Fig 1: Locating Combination Meter Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  
  Fig 2: Locating Tabs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Make sure that the meter dial plate is securely installed to the locating tabs when the combination meter cover is installed.
INSTALL COMBINATION METER GLASS
1. Engage the 7 claws to install the combination meter glass.
  
  Fig 3: Locating Combination Meter Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Do not allow any dirt (fingerprints, grease, etc.) to adhere to the combination meter glass or meter display panel. If they are dirty, wipe them clean with a soft cloth.