Initialization [05/2014 - ]
- OIL MAINTENANCE INDICATOR RESET PROCEDURE
Oil Maintenance Indicator Condition Specified State Blinks Vehicle has been driven 4500 miles since previous setting Indicator blinks for 16 seconds after operation check which occurs after ignition switch is turned to ON Illuminates Vehicle has been 5000 miles since previous setting Indicator illuminates after ignition switch is turned to ON - Set the window display located inside the combination meter to Trip A.
- Turn the ignition switch off.
- While pressing the ODO/TRIP switch (for at least 5 seconds), turn the ignition switch to ON.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
TEXT IN ILLUSTRATION*a 5 sec. until reset process completes *b 4 sec. until reset process completes *c 3 sec. until reset process completes *d 2 sec. until reset process completes *e 1 sec. until reset process completes *f End - When the reset procedure has been completed successfully, the MAINT REQD indicator light turns off and the ODO/TRIP meter indicates 0 (zero) and then returns to its regular display.
HINT:
If the reset fails, the MAINT REQD indicator light remains illuminated. Perform the procedure again.