Installation [05/2013 - 01/2014]
- INSTALL COMBINATION METER ASSEMBLY
- Connect the connector.
- Attach the 2 claws to install the combination meter.
- Install the screw.
- INSTALL METER HOOD SUB-ASSEMBLY . Refer to INSTALLATION [05/2013 - 01/2014] - Step 11
- INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION [05/2013 - 01/2014] - Step 12
- INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH . Refer to INSTALLATION [05/2013 - 01/2014] - Step 13