DTC B1875/67: Short in Passenger Side Front Seat Cushion Squib Circuit; DTC B1876/67: Open in Passenger Side Front Seat Cushion Squib Circuit; DTC B1877/67: Short to GND in Passenger Side Front Seat Cushion Squib Circuit; DTC B1878/67: Short to B+ in Passenger Side Front Seat Cushion Squib Circuit: Description

The seat cushion squib circuit consists of the airbag ECU assembly and the front seat airbag sub-assembly RH.

This circuit instructs the SRS to deploy when deployment conditions are met.

These DTCs are recorded when a malfunction is detected in the seat cushion squib circuit.

DTC No.	DTC Detection Condition	Trouble Area
B1875/67	The airbag ECU assembly receives a line short circuit signal 5 times in the seat cushion squib circuit during primary check. Seat cushion squib malfunction Airbag ECU assembly malfunction	Floor wire Front seat airbag sub-assembly RH (Seat cushion squib RH) Airbag ECU assembly
B1876/67	The airbag ECU assembly receives an open circuit signal in the seat cushion squib circuit for 2 seconds. Seat cushion squib malfunction Airbag ECU assembly malfunction
B1877/67	The airbag ECU assembly receives a short circuit to ground signal in the seat cushion squib circuit for 0.5 seconds. Seat cushion squib malfunction Airbag ECU assembly malfunction
B1878/67	The airbag ECU assembly receives a short circuit to B+ signal in the seat cushion squib circuit for 0.5 seconds. Seat cushion squib malfunction Airbag ECU assembly malfunction