Problem Symptoms Table
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptom are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
ENTIRE SYSTEM
| Symptom | Suspected Area | See Test |
|---|---|---|
| Entire combination meter assembly does not operate. | Power source circuit | Refer to Entire Combination Meter does not Operate |
METER
| Symptom | Suspected Area | See Test |
|---|---|---|
| Speedometer malfunction | Speedometer circuit | Refer to Speedometer Malfunction |
WARNING OR INDICATOR
| Symptom | Suspected Area | See Test |
|---|---|---|
| Master warning light does not come on. (Other system is normal) |
Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Output control warning light malfunction | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| EV battery check indicator light malfunction | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Ready indicator light malfunction | Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Plugin indicator light malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| State of charge (SOC) warning light malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Tire pressure warning light malfunction | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| Tire pressure warning light circuit | Refer to Tire Pressure Warning Light Circuit | |
| Combination meter assembly | Refer to REMOVAL | |
| Tire pressure warning ECU | Refer to REMOVAL | |
| Eco driving indicator light malfunction | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Security indicator light does not blink | Immobiliser system | Refer to Security Indicator Light Does not Blink |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| Slip indicator light does not come ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| Slip indicator light circuit | Refer to Slip Indicator Light does not Come ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Slip indicator light remains ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Slip indicator light circuit | Refer to Slip Indicator Light Remains ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| EPS warning light malfunction | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| EPS warning light circuit | Refer to EPS Warning Light Circuit | |
| Combination meter assembly | Refer to REMOVAL | |
| Steering column assembly (power steering ECU assembly) | Refer to REMOVAL | |
| Open door warning light malfunction | Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Door courtesy switch circuit | Refer to Door Courtesy Switch Circuit | |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Charge warning light malfunction | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| SRS warning light does not come ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| SRS warning light circuit | Refer to SRS Warning Light does not Come ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Airbag ECU assembly | Refer to REMOVAL | |
| SRS warning light remains ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| SRS warning light circuit | Refer to SRS Warning Light Remains ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Airbag ECU assembly | Refer to REMOVAL | |
| Driver side seat belt warning light | Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST |
| Driver side seat belt warning light circuit | Refer to Driver Side Seat Belt Warning Light does not Operate | |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| ABS warning light does not come ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| ABS warning light circuit | Refer to ABS Warning Light does not Come ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| ABS warning light remains ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| ABS warning light circuit | Refer to ABS Warning Light Remains ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Electrically controlled brake warning light does not Come ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| Electrically controlled brake warning light circuit | Refer to Brake Control Warning Light does not Come ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Electrically controlled brake warning light remains ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Electrically controlled brake warning light circuit | Refer to Brake Control Warning Light Remains ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Brake warning light does not come ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST | |
| Brake warning light circuit | Refer to Brake Warning Light does not Come ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Brake warning light remains ON | Combination meter assembly (LED): Initial check | Refer to ON-VEHICLE INSPECTION |
| Brake warning light circuit | Refer to Brake Warning Light Remains ON | |
| Combination meter assembly | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Head indicator light does not come on | Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST |
| Low beam headlight circuit | Refer to Low Beam Headlight Circuit | |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| High beam indicator light malfunction | Combination meter assembly (LED): Perform active test | Refer to DATA LIST / ACTIVE TEST |
| High beam headlight circuit | Refer to High Beam Headlight Circuit | |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Turn indicator light malfunction | Lighting system (Turn signal light) | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Wire harness or connector | - | |
| Combination meter assembly | Refer to REMOVAL |
BUZZER
| Symptom | Suspected Area | See Test |
|---|---|---|
| All buzzers do not operate normally | Combination meter assembly | Refer to REMOVAL |
| Master warning buzzer malfunction (Multi-information display is normal) |
Combination meter assembly | Refer to REMOVAL |
| Each system ECU | - | |
| Ready buzzer malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Immobiliser key identification completion buzzer (Immobiliser system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| Driving with any door opened warning buzzer malfunction (Open door warning light and speed meter is normal) |
Combination meter assembly | Refer to REMOVAL |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Shift position P request buzzer malfunction (Smart key system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Power management control ECU | Refer to REMOVAL | |
| Depress the accelerator pedal with shift selection N buzzer malfunction (Multi-information display is normal) |
Combination meter assembly | Refer to REMOVAL |
| Power management control ECU | Refer to REMOVAL | |
| EPS buzzer malfunction (EPS warning light is normal) |
Combination meter assembly | Refer to REMOVAL |
| Steering column assembly (power steering ECU assembly) | Refer to REMOVAL | |
| Depress the accelerator pedal with shift selection P buzzer malfunction (Multi-information display is normal) |
Combination meter assembly | Refer to REMOVAL |
| Power management control ECU | Refer to REMOVAL | |
| Low SOC buzzer malfunction (EV battery system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Power management control ECU | Refer to REMOVAL | |
| Low battery buzzer malfunction (EV battery system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Power management control ECU | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Charge request buzzer malfunction (EV battery system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Power management control ECU | Refer to REMOVAL | |
| PKB-ON driving warning buzzer malfunction (Brake warning light is normal) |
Combination meter assembly | Refer to REMOVAL |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Brake system temperature rise or active test buzzer malfunction (Electronically controlled brake system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Hill-start assist control buzzer (Set) malfunction (Electronically controlled brake system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Hill-start assist control buzzer (Reset) malfunction (Electronically controlled brake system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Brake control system power low warning buzzer malfunction (Electronically controlled brake system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Smart key system warning buzzer (Continual) malfunction (Smart key system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| Smart key system warning buzzer (Intermittent) malfunction (Smart key system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| Smart key system warning buzzer (Single) malfunction (Smart key system is normal) |
Combination meter assembly | Refer to REMOVAL |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| Seat belt warning buzzer malfunction (Seat belt warning light is normal) |
Combination meter assembly | Refer to REMOVAL |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Airbag ECU assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL |
DRIVING MONITOR
| Symptom | Suspected Area | See Test |
|---|---|---|
| Opening display malfunction (Ready on is normal) |
Combination meter assembly | Refer to REMOVAL |
| EV system indicator display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Average speed after power switch on (Drive information) display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Driving time after power switch on (Drive information) display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Average power consumption after power switch on display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Current power consumption display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Power consumption history after charge display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| 3 mode driving distance display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Normal charge display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Quick charge display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Timer change (Start time) display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| Timer change (Finish time) display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| Timer decision (Start time) display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| Timer decision (Finish time) display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| Door warning display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Traction battery information display malfunction | HV battery system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Auxiliary battery electricity consumption display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Illuminance adjustment display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Settings display malfunction | Combination meter assembly | Refer to REMOVAL |
| Ending display malfunction | Combination meter assembly | Refer to REMOVAL |
MULTI-INFORMATION DISPLAY MESSAGE
| Symptom | Suspected Area | See Test |
|---|---|---|
| "READY INDICATOR OFF PUSH POWER SWITCH OFF AND RECONNECT CHARGE CONNECTOR" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "DISCONNECT CHARGE CONNECTOR BEFORE POWER SWITCH ON" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "MAINTENANCE MODE" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "CERTIFICATION MODE" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "RECHARGE INLET DOOR IS OPEN" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Power management control ECU | Refer to REMOVAL | |
| "AUTO POWER OFF TO CONSERVE BATTERY" display malfunction | HV battery system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "SHIFT TO P POSITION" display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "SHIFT TO P POSITION WHEN PARKED" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "N POSITION" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "RELEASE PARKING BRAKE" display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| "KEY NOT DETECTED" display malfunction | Smart key system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "CHECK STEERING LOCK SYSTEM" display malfunction | Power steering system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "CHECK BRAKE SYSTEM" display malfunction | Electrically controlled brake system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| "CHECK EV SYSTEM" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "TURN POWER OFF" display malfunction | Smart key system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "SHIFT TO P POSITION AND PUSH POWER SWITCH TO TURN OFF" display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Power management control ECU | Refer to REMOVAL | |
| "KEY DETECTED IN VEHICLE" display malfunction | Smart key system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "DEPRESS BRAKE PEDAL, TOUCH POWER SWITCH WITH KEY" display malfunction | Smart key system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "DEPRESS BRAKE PEDAL AND PUSH POWER SWITCH TO START" display malfunction | Smart key system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "SHIFT TO P POSITION WHEN STARTING" display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "STEERING LOCK ACTIVE" display malfunction | Power steering system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "KEY BATTERY LOW" display malfunction | Smart key system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Certification ECU (Smart key ECU assembly) | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE STOPPED EST. COMPLETE TIME REACHED" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE STOPPED TO PROTECT BATTERY DUE TO HI ELEC. CONSUMP." display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE COMPLETE" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE STOPPED DUE TO CHARGE CONNECTOR OPERATION" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE STOPPED DUE TO OUTAGE OR PLUG REMOVAL" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE STOPPED DUE TO INSUFF. POWER SUPPLY" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE STOPPED DUE TO CHARGE CABLE OR OTHER" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE COMPLETE (RESTRICTED DUE TO BATT. TEMP.)" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "CHARGE RESULT: CHARGE STOPPED DUE TO SYSTEM MALFUNCTION" display malfunction | Plugin charge control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Plugin charge control ECU | Refer to REMOVAL | |
| "TRACTION BATT. INSPECTION DUE ASK DEALER TO INSPECT BATTERY" display malfunction | HV battery system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "HAVE DLR. INSPECT TRACT. BATT. NOW VEHICLE MAY NOT BE ABLE TO START" display malfunction | HV battery system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "REGENERATIVE BRAKING LIMITED DEPRESS BRAKE TO DECELERATE" display malfunction | HV battery system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "LOW TRACTION BATTERY IMMEDIATELY CHARGE BATTERY " display malfunction | HV battery system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Electrically controlled brake system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "LOW TRACTION BATTERY TEMP. AVOID RAPID ACCELERATION" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "LOW TRACTION BATTERY TEMP. STOP CAR SAFELY AND CHECK OWNERS MANUAL" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "EV SYSTEM OVERHEAT STOP CAR SAFELY AND CHECK OWNERS MANUAL" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "EV PROTECTION CONTROL ON AVOID RAPID ACCELERATION" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "EV PROTECTION CONTROL ON STOP CAR SAFELY AND CHECK OWNERS MANUAL" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "PLEASE CHARGE BATTERY" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "NO CHARGE STOP CAR IMMEDIATELY IN SAFE LOCATION" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| "NO CHARGE MUST CHARGE BATTERY TO DRIVE" display malfunction | HV battery system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Electrically controlled brake system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING | |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "DRIVE FORCE LIMITED" display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| "ACCEL. PEDAL IS DEPRESSED CHECK THE ACCEL. PEDAL" display malfunction | CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL |
OTHERS
| Symptom | Suspected Area | See Test |
|---|---|---|
| ODO/TRIP meter malfunction | Combination meter assembly | Refer to REMOVAL |
| Brake booster with master cylinder assembly (skid control ECU) | Refer to REMOVAL | |
| Outside temperature malfunction | Combination meter assembly | Refer to REMOVAL |
| Thermistor assembly | Refer to INSPECTION | |
| Wire harness or connector | - | |
| Clock display malfunction | Refer to troubleshooting | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Shift position display malfunction | HV control system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING |
| Combination meter assembly | Refer to REMOVAL | |
| Power management control ECU | Refer to REMOVAL | |
| Meter illumination is always dark | Refer to troubleshooting | Refer to Meter Illumination is Always Dark |
| Other systems that use the speed signal do not operate normally | Refer to troubleshooting | Refer to Speed Signal Circuit |