LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2014 >> iQ EV >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (Electric) >> Charge Lid Light >> Inspection >> Inspection

Charge Lid Light: Inspection: Inspection

  1. INSPECT SPOT LIGHT ASSEMBLY 
    1. Apply auxiliary battery voltage to the connector and check the spot light assembly condition.
      Fig 1: Inspecting Spot Light Assembly
      GTY385901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Spot Light Assembly)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → 1 (+)
      Auxiliary battery negative (-) → 2 (-)      		 Spot light assembly comes on

      If the result is not as specified, replace the spot light assembly.

scientia non olet · About LEMON Manuals