Inspection [05/2013 - ]

INSPECT LIGHT CONTROL RHEOSTAT

Measure the resistance according to the value(s) in the table below.

Fig 1: Measuring Light Control Rheostat Resistance

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*a	Component without harness connected (Light Control Rheostat)
*b	Push

Standard Resistance

Tester Connection	Switch Condition	Specified Condition
6(E) - 9(RV)	Pushed	Below 1 Ω
6(E) - 9(RV)	Free	10 kΩ or higher

If the result is not as specified, replace the light control rheostat.