LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2014 >> iQ Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Diagnostics - Introduction) (Except Electric) >> Meter / Gauge System >> Customize Parameters [05/2013 - ] >> Customize Parameters [05/2013 - ]

Customize Parameters [05/2013 - ]

  1. CUSTOMIZING FUNCTION WITH TECHSTREAM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Record the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    WARNING

    Display Default Content Setting
    Driver Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer ON/OFF
    Front Passenger Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer ON/OFF
    DISPLAY

    Display Default Content Setting
    ECO Drive Indicator Zone ON To change the ECO driving indicator zone display ON/OFF
  2. CUSTOMIZE ECO DRIVING INDICATOR LIGHT 
    1. Turn the ignition switch to ON.
    2. Press the trip meter reset knob until the odometer displays "ECO driving indicator light customize screen"
      Fig 1: Screen Display - Eco OFF / Eco On
      GTY344557Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. While pressing the trip meter reset knob, hold it for 0.8 seconds or more.
    4. When "Eco OFF" is displayed as shown in the illustration, the customization is completed.

      HINT: 

      • When canceling, do not perform the ECO driving indicator light bulb check.
      • Select "Eco On" to restore normal operation.
scientia non olet · About LEMON Manuals