DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication with Vehicle Dynamics Control Module; DTC U0416: Invalid Data Received from Vehicle Dynamics Control Module: Procedure

CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
1. Clear the DTC(s). Refer to DTC CHECK / CLEAR [07/2013 - ] .
2. Check for DTCs. Refer to DTC CHECK / CLEAR [07/2013 - ] .
  OK
  
  DTC is not output.
NG → See step 3

OK → See step 2
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2013 - 12/2013]
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2013 - 12/2013]