DTC C1582: Assist Map Number Mismatch: Procedure
- CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
- Using the Techstream, check for DTCs and confirm that there are no problems in the CAN communication system. Refer to DIAGNOSIS SYSTEM [07/2013 - 12/2013]
.
OK
DTC is not output.
NG → See step 4
OK: Go to next step
- Using the Techstream, check for DTCs and confirm that there are no problems in the CAN communication system. Refer to DIAGNOSIS SYSTEM [07/2013 - 12/2013]
.
- CHECK ECM
- Check if an ECM that complies with the vehicle specifications is installed.
NG → See step 6
OK: Go to next step
- CHECK SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)
- Check if a skid control ECU (brake actuator assembly) that complies with the vehicle specifications is installed.
NG → See step 7
OK → See step 5
- GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2013 - 12/2013]
- REPLACE POWER STEERING ECU ASSEMBLY. Refer to REMOVAL [07/2013 - ]
- REPLACE ECM. Refer to REMOVAL [07/2013 - 12/2013]
- REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY). Refer to REMOVAL [07/2013 - ]