On-Vehicle Inspection [07/2013 - ]

WARNING:

Be sure to correctly follow the removal and installation procedures for the front seat outer belt assembly.

INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
1. Perform a diagnostic system check. Refer to DTC CHECK / CLEAR [07/2013 - ] .
2. Visually check for defects with the front seat outer belt assembly installed on the vehicle.
  1. The defects are as follows:
    - Cuts on the front seat outer belt assembly
    - Small cracks on the front seat outer belt assembly
    - Significant discoloration on the front seat outer belt assembly
    OK
    
    No defects are found.
    
    HINT:
    
    If any of the defects is found, replace the front seat outer belt assembly with a new one.
INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)
1. Perform a diagnostic system check. Refer to DTC CHECK / CLEAR [07/2013 - ] .
2. Visually check for defects with the front seat outer belt assembly removed from the vehicle.
  1. The defects are as follows:
    - Cuts on the front seat outer belt assembly
    - Small cracks on the front seat outer belt assembly
    - Significant discoloration on the front seat outer belt assembly
    - Cracks or other damage to the connector
    OK
    
    No defects are found.
    
    HINT:
    
    If any of the defects is found, replace the front seat outer belt assembly with a new one.