LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2014 >> FR-S Standard Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Seat Belts >> Seat Belt (Service Information) >> Child Restraint Seat Tether Anchor >> Removal [07/2013 - ] >> Removal [07/2013 - ]

Removal [07/2013 - ]

  1. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH  . Refer to REMOVAL [07/2013 - ] - Step 1
  2. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  3. REMOVE BENCH TYPE REAR SEATBACK ASSEMBLY  . Refer to REMOVAL [07/2013 - ] - Step 4
  4. REMOVE FRONT DOOR SCUFF PLATE LH  . Refer to REMOVAL [07/2013 - ] - Step 11
  5. REMOVE FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

  6. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH 

    HINT: 

    Disconnect the front door opening trim weatherstrip to the extent that allows the removal of the luggage compartment trim cover.

  7. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT: 

    Use the same procedure as for the LH side.

  8. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH  . Refer to REMOVAL [07/2013 - ] - Step 19
  9. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  10. REMOVE QUARTER TRIM LID SUB-ASSEMBLY LH  . Refer to REMOVAL [07/2013 - ] - Step 21
  11. REMOVE QUARTER TRIM LID SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  12. REMOVE REAR WINDOW SIDE GARNISH LH  . Refer to REMOVAL [07/2013 - ] - Step 23
  13. REMOVE REAR WINDOW SIDE GARNISH RH 

    HINT: 

    Use the same procedure as for the LH side.

  14. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY  . Refer to REMOVAL [07/2013 - ] - Step 15
  15. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    1. Remove the bolt and disengage the hook to remove the child restraint seat tether anchor bracket.
      Fig 1: Locating Bolt And Disengaging Hook
      GTY387259Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use the same procedure for the 2 child restraint seat tether anchor brackets.