DTC B11F6: Side and Curtain Airbag Inflated: Procedure

REPLACE CORRESPONDING PARTS
1. Replace the following parts.
  HINT:
  
  If the DTC B11F6 is stored, it cannot be cleared until the following parts are replaced.
  - Airbag ECU assembly. Refer to REMOVAL [07/2013 - 12/2013]
  - Front seat airbag assembly RH or LH (Front side squib RH or LH) (Deployed side). Refer to REMOVAL [07/2013 - ]
  - Curtain shield airbag assembly RH or LH (Curtain shield squib RH or LH) (Deployed side). Refer to REMOVAL [07/2013 - ]
  - Side airbag sensor assembly RH or LH (Deployed side). Refer to REMOVAL [07/2013 - ]
  - Side No. 2 airbag sensor assembly RH or LH (Deployed side). Refer to REMOVAL [07/2013 - ]
  - Rear airbag sensor RH or LH (Deployed side). Refer to REMOVAL [07/2013 - ]
  - No. 2 airbag sensor assembly. Refer to REMOVAL [07/2013 - ]
NEXT → END