Typical Enabling Conditions
ALL
| Monitor runs whenever following DTCs not stored | P0101, P0102, P0103 (Mass air flow (MAF) sensor) P0111, P0112, P0113 (Intake air temperature (IAT) sensor) P0117, P0118, P0125 (Engine coolant temperature (ECT) sensor) P0122, P0123, P0222, P0223 (Throttle position sensor) P0300, P0301, P0302, P0303, P0304 (Misfire) P0335, P0336 (Crankshaft position sensor) P0340, P0345 (Camshaft position sensor - Intake with variable valve timing (VVT)) P0341, P0346 (Camshaft Position Sensor - Intake with Variable Valve Timing (VVT)) P0366, P0391 (Camshaft Position Sensor - Exhaust with Variable Valve Timing (VVT)) P0500 (Vehicle speed sensor (VSS)) P0604 (RAM in ECM) P0605 (ROM in ECM) P1160 (Throttle return spring) P2101, P2102 (Throttle actuator control motor) P2109 (Throttle position sensor minimum stop) P2119 (Throttle actuator control) P2122, P2123, P2127, P2128 (Accelerator pedal position sensor (APPS) circuit) P2135 (Throttle position sensor (TPS) correlation) P2138 (Accelerator pedal position sensor (APPS) correlation) |
| Battery voltage | 10.9 V or more |
| Ambient temperature | -7°C (19.4°F) or higher |
| Vehicle speed | 30 km/h (18.6 mph) or more |
CASE 1
| Modeled engine coolant temperature | Higher than 60°C (140°F) |
| Engine coolant temperature at engine start | Less than 60°C (140°F) |
CASE 2
| Modeled engine coolant temperature | Higher than 70.2 to 77.8°C (158.4 to 172°F) (varies with ambient temperature at engine start) |
| Engine coolant temperature at engine start | Less than 60°C (140°F) |
CASE 3
| Modeled engine coolant temperature | 47.1 to 77.8°C (116.8 to 172°F) or higher (varies with ambient temperature at engine start) |
| Engine coolant temperature at engine start | Less than 60°C (140°F) |