LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2014 >> FR-S Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Removal [07/2013 - ] >> Removal [07/2013 - ]

Removal [07/2013 - ]

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL [07/2013 - 12/2013] - Step 5
  2. REMOVE METER HOOD SUB-ASSEMBLY  . Refer to REMOVAL [07/2013 - 12/2013] - Step 14
  3. REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT  . Refer to REMOVAL [07/2013 - 12/2013] - Step 15
  4. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 2 screws.
      Fig 1: Locating Combination Meter Assembly Screws & Clips
      GTY392086Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 clips.
    3. Disconnect the connector and remove the combination meter assembly.
      Fig 2: Locating Combination Meter Assembly Connector
      GTY386877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals