LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2014 >> FR-S Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) >> Stop Light Switch >> Inspection [07/2013 - ] >> Inspection [07/2013 - ]

Inspection [07/2013 - ]

  1. INSPECT STOP LIGHT SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Measuring Stop Light Switch Assembly Resistance
      GTY384855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed 10 kΩ or higher
      Not pushed Below 1 Ω
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Stop Light Switch Assembly)

      If the result is not as specified, replace the stop light switch assembly.

scientia non olet · About LEMON Manuals