LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2014 >> FR-S Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Disassembly [07/2013 - ] >> Disassembly [07/2013 - ]

Disassembly [07/2013 - ]

  1. REMOVE COMBINATION METER GLASS 
    1. Disengage the 7 claws and remove the combination meter glass.
      Fig 1: Locating Combination Meter Assembly Claws
      GTY391695Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Do not touch the pointer and the dial plate when removing the combination meter glass and combination meter cover.
      • Do not allow any dirt (fingerprints, grease, etc.) to adhere to the combination meter glass or meter display panel. If they are dirty, wipe them clean with a soft cloth.
  2. REMOVE COMBINATION METER COVER 
    1. Disengage the 6 claws and remove the combination meter cover.
      Fig 2: Locating Combination Meter Cover Claws
      GTY385181Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not touch the pointer and the dial plate when removing the combination meter glass and combination meter cover.

scientia non olet · About LEMON Manuals