LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> xB Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter & Gauge System (Diagnostics - Introduction) >> Meter / Gauge System >> Initialization >> Initialization

Meter / Gauge System: Initialization: Initialization

  1. OIL MAINTENANCE INDICATOR RESETTING PROCEDURE 
    Oil Maintenance Indicator Condition Specified State
    Blinks Vehicle has run 4, 500 miles since previous setting Indicator blinks for 15 seconds after ignition switch is turned ON (including 3 seconds for valve check)
    Illuminates Vehicle has run 5, 000 miles since previous setting Indicator illuminates after ignition switch is turned ON
    1. Set the window display located inside the combination meter to the Trip A indication.
    2. Turn the ignition switch off.
    3. While pressing the ODO/TRIP display change switch (reset switch) (for at least 5 seconds), turn the ignition switch on (IG).
    4. When the reset procedure has been completed successfully, the MAINT REQD indicator light turns off and the ODO/TRIP meter indicates 0 (zero) and then returns to its regular display.

      HINT: 

      If the reset fails, the MAINT REQD indicator light remains illuminated. Perform the procedure again.

scientia non olet · About LEMON Manuals