DTC P329B-123: EV Battery No. 2 Pack Current Sensor "A" Circuit Range / Performance: Procedure
- CHECK DTC OUTPUT (EV BATTERY)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / EV Battery / Trouble Codes.
- Read output DTCs.RESULT
Result Proceed to P31AE-123, P1A71-123, P1A74-123 is not output A P31AE-123, P1A71-123, P1A74-123 is output B - Turn the power switch off.
B → See step 5
A: Go to next step
- CHECK DTC OUTPUT (EV BATTERY) See step 1
B → See step 6
A: Go to next step
- CHECK DTC OUTPUT (EV BATTERY)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / EV Battery / Trouble Codes.
- Read output DTCs.RESULT
Result Proceed to P1A20-123, P1A25-123, P302A-123 is not output A P1A20-123, P1A25-123, P302A-123 is output B - Turn the power switch off.
B → See step 8
A: Go to next step
- REPLACE ELECTRIC VEHICLE BATTERY ASSEMBLY
Refer to COMPONENTS
NEXT → See step 7
- GO TO DTC CHART (P31AE-123). Refer to DTC P31AE-123: EV Battery No. 2 Cell Low Voltage Stack "A"; DTC P1A71-123: EV Battery No. 2 Cell Low Voltage Stack "B"; DTC P1A74-123: EV Battery No. 2 Cell Low Voltage Stack "C"
- GO TO DTC CHART (P300E-123). Refer to DTC P300E-123: EV Battery No. 2 Pack Sensor Module
- GO TO NO. 1 EV BATTERY - NO. 2 EV BATTERY VOLTAGE DIFFERENCE INSPECTION. Refer to No. 1 EV Battery - No. 2 EV Battery Voltage Difference Inspection
- GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART