DTC P1A48-123: EV Battery No. 2 Pack Internal Electrical Resistance High Stack "A"; DTC P1A49-123: EV Battery No. 2 Pack Internal Electrical Resistance High Stack "B"; DTC P1A4A-123: EV Battery No. 2 Pack Internal Electrical Resistance High Stack "C": Procedure
- CHECK DTC OUTPUT (EV BATTERY)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / EV Battery / Trouble Codes.
- Read output DTCs.RESULT
Result Proceed to Only P1A48-123, P1A49-123 or P1A4A-123 is output. A DTCs including pending DTCs other than P1A48-123, P1A49-123 and P1A4A-123 are output B - Turn the power switch off.
B → See step 3
A: Go to next step
- REPLACE ELECTRIC VEHICLE BATTERY ASSEMBLY
Refer to COMPONENTS
NEXT → See step 4
- GO TO DTC CHART (HYBRID BATTERY SYSTEM). Refer to DIAGNOSTIC TROUBLE CODE CHART
- GO TO NO. 1 EV BATTERY - NO. 2 EV BATTERY VOLTAGE DIFFERENCE INSPECTION. Refer to No. 1 EV Battery - No. 2 EV Battery Voltage Difference Inspection