Customize Parameters

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Customize Setting / Warning, Display.
5. Select the setting by referring to the table below.
   WARNING
   
   

   Techstream Display	Default	Content	Setting	Relevant ECU
   Driver Side Seatbelt Warning Buzzer	ON	Function to change the seat belt warning buzzer	OFF or ON	Combination meter assembly
   Front Passenger Side Seatbelt Warning Buzzer	ON	Function to change the seat belt warning buzzer	OFF or ON	Combination meter assembly

   DISPLAY
   
   

   Techstream Display	Default	Content	Setting	Relevant ECU
   ECO Drive Indicator Zone	ON	Function to change the ECO Drive Indicator Zone	OFF or ON	Combination meter assembly

HINT: 

• Press the DISP switch to enter an item.
• Rotate the DISP switch when selecting an item.

1. Turn the power switch on (IG).
2. Select the following menus: SETTINGS.
3. Select the setting by referring to the table below.
   NOTE:

   Be sure to record the current value before customizing.

   HINT: 

   The following items can be customized for the combination meter assembly.

   SETTINGS
   
   

   Combination Meter Assembly Display	Default	Content	Setting	Relevant ECU
   ECO	ON	Function to display/not display the eco driving indicator light	ON or OFF	Combination meter assembly
   CLOCK	-	Function to time setup	-	Combination meter assembly
   AMBIENT LIGHT	ECO STATUS	Function to change the ambient light	ECO STATUS, BLUE, GREEN, RED, OFF	Combination meter assembly