DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0151: Lost Communication with Airbag ECU: Procedure
- CONFIRM DTC OUTPUT
- Check DTC. Refer to DTC CHECK / CLEAR
.
Result Proceed to CAN communication DTC is not output A CAN communication DTC is output B
B → See step 2
A → See step 3
- Check DTC. Refer to DTC CHECK / CLEAR
.
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING