LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> FR-S Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Removal [03/2012 - ] >> Removal [03/2012 - ]

Removal [03/2012 - ]

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL [03/2012 - 05/2013] - Step 5
  2. REMOVE METER HOOD SUB-ASSEMBLY  . Refer to REMOVAL [03/2012 - 05/2013] - Step 14
  3. REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT  . Refer to REMOVAL [03/2012 - 05/2013] - Step 15
  4. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 2 screws.
      Fig 1: 2 Screws & 2 Clips
      GTY392086Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 clips.
    3. Disconnect the connector and remove the combination meter assembly.
      Fig 2: Disconnect The Connector
      GTY386877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals