DTC P0335: Crankshaft Position Sensor "A" Circuit; DTC P0336: Crankshaft Position Sensor Range / Performance [05/2013 - ]: Description
The crankshaft position sensor system consists of a No. 1 crankshaft position sensor plate and Magnetoresistive Element (MRE) type sensor. The crankshaft angle sensor plate is installed on the crankshaft. The crankshaft position sensor generates 30 signals per crankshaft revolution. The ECM uses the camshaft position signal to distinguish between the cylinders, and uses the crankshaft position signal to detect the crankshaft position and engine speed.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0335 | No crankshaft position sensor signal is sent to the ECM while cranking for 3 seconds or more. (1 trip detection logic) |
|
| P0336 | Crankshaft position sensor signal is not 30 counts per 1 revolution of crankshaft 10 times continuously. (2 trip detection logic) |
|