Typical Enabling Conditions
P0512 (WITH SMART KEY SYSTEM)
| Monitor runs whenever following DTCs not stored | None |
| Battery voltage | 8 V or more |
| Vehicle speed | More than 500 rpm |
P0616 (WITH SMART KEY SYSTEM)
| Battery voltage | 8 V or more |
| Engine condition | Start up and across 500 rpm |
| Vehicle speed | Less than 1 km/h (0.6 mph) |
P0616 (WITHOUT SMART KEY SYSTEM)
| Monitor runs whenever following DTCs not stored | P0500 (Vehicle speed sensor (VSS)) |
| Battery voltage | 8 V or more |
| Engine condition | Start up and across 500 rpm |
| Vehicle speed | Less than 1 km/h (0.6 mph) |
P0617 (WITH SMART KEY SYSTEM)
| Battery voltage | 8 V or more |
| Engine speed | More than 500 rpm |
| Starter relay | Off |
P0617 (WITHOUT SMART KEY SYSTEM)
| Monitor runs whenever following DTCs not stored | P0500 (Vehicle speed sensor (VSS)) |
| Battery voltage | 8 V or more |
| Engine speed | More than 500 rpm |
P081A (WITH SMART KEY SYSTEM)
| Monitor runs whenever following DTCs not stored | None |
| Battery voltage | 8 V or more |
| Vehicle speed | Less than 1 km/h (0.6 mph) |
| Starter cut relay | On |