LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> FR-S Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (Service Information) >> Cooling Fan Motor >> On-Vehicle Inspection [03/2012 - ] >> On-Vehicle Inspection [03/2012 - ]

On-Vehicle Inspection [03/2012 - ]

  1. INSPECT COOLING FAN MOTOR 
    1. Check that the motor operates smoothly when the battery is connected to the cooling fan motor connector.
      Fig 1: Component Without Harness Connected
      GTY384827Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Cooling fan motor)

      If the motor does not operate smoothly, replace the cooling fan motor.

    2. Measure the current while the motor is operating.

      Standard Current

      Item Condition Specified Condition
      Cooling fan motor 20°C (68°F) 7.4 to 11.4 A at 12 V

      If the result is not as specified, replace the cooling fan motor.

  2. INSPECT NO. 2 COOLING FAN MOTOR 
    1. Check that the motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
      Fig 2: Component Without Harness Connected
      GTY384827Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (No. 2 cooling fan motor)

      If the motor does not operate smoothly, replace the No. 2 cooling fan motor.

    2. Measure the current while the motor is operating.

      Standard Current

      Item Condition Specified Condition
      No. 2 cooling fan motor 20°C (68°F) 7.4 to 11.4 A at 12 V

      If the result is not as specified, replace the No. 2 cooling fan motor.

scientia non olet · About LEMON Manuals