LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2013 >> FR-S Standard Trans >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> OEM System Circuits >> Seat Belt Warning >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
AD1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Engine Room Main Wire and Instrument Panel Wire (Cowl Side Panel RH)
AD2 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Engine Room Main Wire and Instrument Panel Wire (Instrument Panel Reinforcement)
GD1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS No. 1 Floor Wire and Instrument Panel Wire (Cowl Side Panel RH)
Ge1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS; : LOCATION OF GROUND POINTS No. 1 Floor Wire and Occupant Detection Sensor Wire (Under Front Seat Cushion RH)
HD1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS No. 2 Floor Wire and Instrument Panel Wire (Cowl Side Panel LH)