Installation [03/2012 - ]

1. Install the No. 3 parking brake cable assembly to the parking brake plate with the clamp.
2. Install the No. 3 parking brake cable assembly to the body with the 4 bolts.

   Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

HINT: 

Use the same procedure for the No. 2 parking brake cable assembly as for the No. 3 parking brake cable assembly.

Refer to INSTALLATION [03/2012 - ]

1. Install the center exhaust pipe assembly with the cushion rubber.
2. Install the new gasket and the center exhaust pipe assembly with the 2 new nuts and the 2 bolts to tail exhaust pipe assembly.

   Torque: 48 N*m (490 kgf*cm, 35 ft.*lbf) 

   HINT: 

   • Do not reuse the gaskets.
   • Do not reuse the nuts.
3. Install the new gasket and the front exhaust pipe assembly with the 2 nuts and the 2 bolts and the 2 compression springs to the center exhaust pipe assembly.

   Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

   HINT: 

   Do not reuse the gaskets.

1. Install the lower casing bracket of the body with the 2 bolts.

   Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

1. Install the clamp H/B of the casing lower bracket with the 2 nuts.

   Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

Refer to REASSEMBLY [03/2012 - ] 

Refer to INSTALLATION [03/2012 - 05/2013]