Reassembly [03/2012 - ]

INSTALL BRAKE PEDAL BUSH

Install the 2 brake pedal bushes to the brake pedal.

Fig 1: 2 Brake Pedal Bushes

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	Brake Pedal Bush
*2	Brake Pedal

INSTALL BRAKE PEDAL

Apply lithium soap base glycol grease to the brake pedal return spring and the clutch master cylinder bracket.

Fig 2: Brake Pedal Return Spring And The Clutch Master Cylinder Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	Brake Pedal Return Spring
*2	Clutch Master Cylinder Bracket
	Lithium Soap Base Glycol Grease

Install the clutch master cylinder bracket and the brake pedal to the brake pedal support sub-assembly.

Fig 3: Clutch Master Cylinder Bracket And The Brake Pedal

TEXT IN ILLUSTRATION

*1	Clutch Master Cylinder Bracket
*2	Brake Pedal
*3	Brake Pedal Support Sub-assembly

Install the bolt.
Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)

Fig 4: Remove The Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002