LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xD Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> COMPRESSOR (for 2ZR-FE) >> Removal

COMPRESSOR (for 2ZR-FE): Removal

  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM  (See REPLACEMENT  )
  2. REMOVE ENGINE UNDER COVER RH 
  3. REMOVE NO. 2 CYLINDER HEAD COVER  (See REMOVAL )
  4. REMOVE FAN AND GENERATOR V BELT  (See REMOVAL )
  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE 
    1. Remove the bolt and disconnect the discharge hose from the compressor.
      2. Fig 1: Identifying Cooler Refrigerant Discharge Hose Bolt
      G05401796Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the O-ring from the discharge hose.
      NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
  6. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE 
    1. Remove the bolt and disconnect the suction hose from the compressor.
      2. Fig 2: Identifying Cooler Refrigerant Suction Hose Bolt
      G05401797Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the O-ring from the suction hose.
      NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
  7. REMOVE COMPRESSOR 
    1. Disconnect the connector and 2 clamps.
      Fig 3: Locating Compressor Connector
      G05401798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and the 2 nuts.
      Fig 4: Identifying Compressor Bolts And Nuts
      G05401799Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using a "TORX" socket wrench (E8), remove the 2 stud bolts and the compressor.
      Fig 5: Identifying Compressor Stud Bolts
      G05401800Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals