Park / Neutral Position Switch: Inspection
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Measure the resistance with the shift lever in each position.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Shift Lever Position Specified Condition 2 (RB) - 6 (PL) and 4 (B) - 5 (L) P Below 1 Ω Except P 10 kΩ or higher 2 (RB) - 1 (RL) R Below 1 Ω Except R 10 kΩ or higher 2 (RB) - 9 (NL) and 4 (B) - 5 (L) N Below 1 Ω Except N 10 kΩ or higher 2 (RB) - 7 (DL) D and S, "+" and "-" Below 1 Ω Except D and Except S, "+" and "-" 10 kΩ or higher If the resistance is not as specified, replace the park/neutral position switch assembly.
- Measure the resistance with the shift lever in each position.