LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2AZ-FE Engine Mechanical >> Drive Belt >> Installation

Drive Belt: Installation

  1. INSTALL FAN AND GENERATOR V BELT 
    1. Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V belt.

      SST 09216-42010 (09216-04010) 

      Fig 1: Fan And Generator V Belt Routing
      G05387026Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Be sure to connect SST and the tools so that they are in line during use.
      • When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
      • After the tensioner is fully retracted, do not apply any more force than is necessary.
  2. INSTALL REAR ENGINE UNDER COVER RH 
scientia non olet · About LEMON Manuals