REAR SEAT ASSEMBLY (for LH Side): Installation

INSTALL REAR SEATBACK ASSEMBLY
1. Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
2. Pull up the rear seatback.
  
  Fig 1: Locating Rear Seatback Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the rear center seat outer belt assembly with the bolt.
  Torque: 41 N*m (420 kgf*cm, 30 ft.*lbf)
Fig 2: Locating & Installing Seat Belt Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY
1. Pass the rear seat inner belt through the rear seat cushion cover pad slit.
2. Engage the 3 hooks and install the rear seat cushion cover pad.
  NOTE: Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.
  
  Fig 3: Identifying Rear Seat Cushion Cover Pad Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002