LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> xD Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2ZR-FE Engine Mechanical >> Drive Belt >> Removal

Drive Belt: Removal

  1. REMOVE ENGINE UNDER COVER RH 
  2. REMOVE NO. 2 CYLINDER HEAD COVER  (See REMOVAL )
  3. REMOVE FAN AND GENERATOR V BELT 
    1. Loosen bolts A and B.
      2. Fig 1: Locating Generator Bolts
      G05398831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn adjusting bolt C to release the tension and remove the V belt from the pulleys.
    3. Remove the fan and generator V belt.
scientia non olet · About LEMON Manuals