DTC U0129 Lost Communication with Skid Control ECU: Description
The combination meter assembly receives signal from skid control ECU through the CAN communication system.
DTC DETECTION CONDITIONS AND TROUBLE AREAS
| DTC No. |
DTC Detection Conditions |
Trouble Areas |
| U0129 |
When either of following conditions detected
- 15 seconds have elapsed since engine started and IG voltage 10 5 V or more
- No communication with skid control ECU continues for 3 seconds or more (No communication with ECM or skid control ECU continues for 60 seconds or more)
|
- Brake actuator (Skid control ECU)
- ABS and traction actuator (Skid control ECU)
- CAN communication system
|