Steering Pad: Removal

CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See PRECAUTION ).

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
REMOVE STEERING PAD
1. Using "TORX" socket wrench T30, loosen the 2 bolts completely.
2. Pull the steering pad toward you.
  
  Fig 1: Locating Torx Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a thin-bladed screwdriver, release the locking button.
4. Using a thin-bladed screwdriver, disconnect the 2 connectors.
5. Detach the horn terminal.
Fig 2: Releasing Locking Button
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002