REAR SEAT ASSEMBLY (for RH Side): Installation
- INSTALL REAR SEATBACK ASSEMBLY
- Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.
Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
- Pull up the rear seatback.
- Install the rear center seat outer belt into the rear center seat shoulder belt guide.
- Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.
- INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY (See INSTALLATION )