REAR SEAT ASSEMBLY (for LH Side): Removal

REMOVE REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY
1. Hold the front edge of the rear seat cushion cover pad and lift it up, as shown in the illustration, to disengage the 2 hooks.
  NOTE: Hold the area around the hooks so as to avoid deforming the rear seat cushion frame.
2. Pass the rear seat inner belt through the slit in the rear seat cushion cover pad, disengage the hook between the rear seat cushion cover pad and the rear seatback, and remove the rear seat cushion cover pad.
  
  Fig 1: Identifying Front Edge Of Rear Seat Cushion Cover Pad Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR SEATBACK ASSEMBLY
1. Remove the bolt and the rear center seat outer assembly.
2. Push the rear seatback lock release button and tilt the rear seatback forward.
  
  Fig 2: Locating Belt Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 bolts, the 2 hooks and the rear seatback.
Fig 3: Locating Rear Seatback Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002