LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2008 >> tC Spec, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Spiral Cable >> Removal

Spiral Cable: Removal

CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see PRECAUTION  ).
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE STEERING PAD ASSEMBLY  (See REMOVAL  )
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  5. REMOVE STEERING COLUMN COVER  (See REMOVAL )
  6. REMOVE SPIRAL CABLE SUB-ASSEMBLY 
    1. Disconnect the connectors from the spiral cable.
      NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
    2. Disengage the 3 claws and remove the spiral cable.
scientia non olet · About LEMON Manuals