Driver Side Knee Airbag Assembly: Removal

CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see PRECAUTION ).

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
1. Remove the 4 bolts and driver side knee airbag.
2. Disconnect the connector.
  NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
  
  Fig 1: Identifying Driver Side Knee Airbag Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002