LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2007 >> tC Spec, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Driver Side Knee Airbag Assembly >> Removal

Driver Side Knee Airbag Assembly: Removal

CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see PRECAUTION  ).
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY 
    1. Remove the 4 bolts and driver side knee airbag.
    2. Disconnect the connector.
      NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
      Fig 1: Identifying Bolts And Driver Side Knee Airbag
      G04866832Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals