Rear Seat Assembly: Installation

INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY
1. Install the anchor bracket with the 4 bolts.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
INSTALL REAR SEATBACK LOCK STRIKER SUBASSEMBLY LH
1. Install the seatback lock striker with the 2 bolts.
  Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
INSTALL REAR SEATBACK LOCK STRIKER SUBASSEMBLY RH
1. Install the seatback lock striker with the 2 bolts.
  Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
INSTALL REAR SEATBACK ASSEMBLY LH
1. Turn up the seatback cover as shown in the illustration.
2. Install the seatback with the 2 bolts.
  Torque: 37 N*m (377 kgf*cm, 27 ft.*lbf)
3. Return the seatback to the upright position.
  
  Fig 1: Installing Seatback With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEATBACK ASSEMBLY RH
HINT:

Use the same procedures described for the LH side.

Torque: 37 N*m (377 kgf*cm, 27 ft.*lbf)

Fig 2: Turning Up Seatback Cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY
1. Attach the seat cushion's rear hook.
2. Attach the seat cushion's 2 front hooks to the vehicle body.
3. Confirm that the seat cushion is firmly installed.
  NOTE: When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.
  
  Fig 3: Attaching Seat Cushion Front Hooks To Vehicle Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002