LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2006 >> xA Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper & Washer >> Wiper Switch >> Installation

Wiper Switch: Installation

  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY 
    1. Attach the claw to install the wiper switch.
    2. Connect the connector.
  2. INSTALL STEERING COLUMN COVER (See  INSTALLATION  ) 
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals