LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2006 >> xA Standard >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Center Cluster Box Illumination >> Installation

Center Cluster Box Illumination: Installation

  1. INSTALL CENTER CLUSTER BOX ILLUMINATION 
    1. Install the light.
    2. Connect the connector.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER (See  INSTALLATION  ) 
  3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See  INSTALLATION  ) 
  4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See  INSTALLATION  ) 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals