On-Vehicle Inspection
- CHECK ILLUMINATED ENTRY SYSTEM OPERATION
HINT:
The light that comes on upon entry is the No. 1 room light assembly.
- Turn the ignition switch OFF, close all the doors, and lock the driver's door.
- Unlock the driver's door, open one of the doors, and check that the No. 1 room light assembly comes on. Then, close the door and check that the No. 1 room light assembly goes off after approximately 15 seconds.
- Turn the ignition switch to the ON position, and open and close one of the doors. Check that the No. 1 room light assembly goes off immediately.
- Turn the ignition switch OFF.
- Open and close one of the doors to turn on the No. 1 room light assembly. Before the No. 1 room light assembly goes off, after approximately 15 seconds, turn the ignition switch to the ON position, and check that the No. 1 room light assembly goes off immediately.
- Turn the ignition switch OFF.
- Open and close one of the doors to turn on the No. 1 room light assembly. Before the No. 1 room light assembly goes off, after approximately 15 seconds, lock the driver's door, and check that the No. 1 room light assembly goes off immediately.