Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | See LIST OF DISABLE A MONITOR |
| Battery voltage | 8 V or more |
| Engine RPM | 450 rpm to allowable RPM limit |
| All of following 1 and 2 met | - |
| 1. Engine coolant temperature | -10°C (14°F) or more |
| 2. Either of following conditions (a) or (b) met | - |
| (a) Engine coolant temperature at engine start | More than -7°C (19°F) |
| (b) Engine coolant temperature | More than 20°C (68°F) |
| Mass air flow rate | 0.148 gm/rev or more (varies with engine coolant temperature and RPM) |
| Throttle valve position | Not changing rapidly |